Zipp Vuka Handlebar Extensions for Aerobars 3 styles

Zipp Vuka Handlebar Extensions for Aerobars 3 styles

Our price £39.99
Retail Price £109.99
You Save £70.00
Click & Collect
RefColour/SizeStock Price 
154956 StraightIn StockPrice Match£39.99

Product Details

Zipp Vuka Handlebar Extensions for Aerobars 3 styles

To help every rider find their fit, Zipp have created three different all-carbon extensions for the VukaAero and VukaClip. Straight extensions will get you as low as humanly possible. Chicanes are ideal for mid-range speed and share their S-bend shape with the VukaShift. Ski Tips offer long-haul comfort.

All Vuka extensions can be shortened by almost 100mm from their standard 335mm length to accommodate any bike configuration including ITU-legal racing. Internal cable routing for aerodynamics and ergonomics. Approximately 100g per pair.

Guidelines For Cutting The Extensions

The extensions are marked on the underside in 1cm increments with half centimeter increments shown with smaller lines. A minimum of 3cm of extension must be inserted into the VukaBullet body to avoid damaging the extensions. This means that a minimum of 6 marks (3 large and 3 small) must be inserted into the bar after the bars are cut to length.
If more than 4cm of extension need to be removed, we recommend removing in 2-3cm increments to avoid overcutting of the extensions.
The extension should be wrapped in masking tape at the point where it will be cut and cut with a composite or FRP specific hacksaw blade. The masking tape will help ensure that the cut is clean and no jagged fibers lift off of the part.
Warning – do NOT cut anything from the front end of these extensions.

Tech Spec:

Straight
Weight 101 (+/-3)g
Length max 335mm, min 265mm
Diameter 22.0mm +0,05mm -0.15mm

Ski Tip
Angle from Vertical 50 Degrees
Inside Length to Start of Bend Without Cutting 207mm
Inside Bend Length 92mm

Chicane
Inside Length to Start of Bend Without Cutting 207mm
Rise from Horizontal 40mm